Design HVAC systems including ductwork, piping, equipment selection, load calculations and energy modeling. Produce Revit/BIM construction drawings, review shop drawings, specify mechanical equipment, perform site visits, support construction administration, attend project meetings, and assist less experienced staff under a licensed engineer's direction.
If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. Candidates must be located in or near a CannonDesign office.
ABOUT THE ROLE
You will be a member of our multi-disciplinary team and will work under the direction of a licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology.
HERE'S WHAT YOU WILL DO
- Perform designs of ductwork, piping, equipment selection for HVAC systems for building design, independently for smaller/less technical projects; under the supervision of a professional engineer for complex projects. As necessary assist with Plumbing and Fire Protection Designs.
- Calculate heating and cooling loads, layout and design ductwork and piping using energy modeling software.
- Prepare Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling for plumbing and fire protection systems.
- Edit specifications relating to existing or new projects.
- Specify mechanical equipment such as boilers, chillers, and air handling units.
- Review shop drawings for compliance of specifications and contract documents.
- Interface effectively with clients and members of the project team by attending Owner, Architect, Construction Administration (OAC) meetings in conjunction with project budget.
- May independently research as need arises and respond to emergent issues.
- Assists in gathering information to respond to RFI’s and review of change orders in the preparation of construction documents.
- Perform job site visits to verify existing conditions and observe construction progress. Site visits frequently require a physical walk-through of site.
- May direct activities of staff with less experience.
- Perform other duties as assigned.
HERE'S WHAT YOU WILL NEED
- Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred.
- Minimum of 4 years of related experience required.
- EIT/FE in the United States preferred.
- LEED accreditation preferred.
- Excellent verbal and written communication skills.
- Able to effectively handle multiple projects.
- Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required.
The salary range for this position is $70,737 to $83,220 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at https://www.cannondesign.com/careers/benefits. Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level.
ABOUT OUR FIRM
CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don’t just dream up solutions — we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It’s more than a philosophy — it’s who we are, and it drives us to make a meaningful, lasting difference every day.
ABOUT WORKING HERE
- We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about.
- We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives.
- We’re about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we’re ready for you.
As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.
CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm’s policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign’s policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.
CannonDesign Seattle, Washington, USA Office
110 Union St., Seattle, United States, 98101
Similar Jobs
Aerospace • Defense • Manufacturing
Designs and drafts mechanical components for solid rocket motors, including motor cases, nozzles, insulation, joints, and structural interfaces. Creates CAD models, engineering drawings, and specifications; supports design integration, configuration control, and manufacturability. Reads technical documentation, evaluates design proposals, specifies components, troubleshoots equipment failures, and collaborates with engineering and maintenance teams. Travel may be required up to 25%.
Top Skills:
3D CadCad SoftwareComputer-Aided Engineering (Cae) SoftwareExcelMicrosoft PowerpointMicrosoft Word
Logistics • Other • Software
Supervises mechanical installation, assembly, dismantling, maintenance, troubleshooting, and repair of industrial machinery, including conveyors, sorters, hydraulic systems, pumps, gears, and compressors. Oversees equipment rigging, hoisting, alignment, and positioning; supports inventory control and reporting; and qualifies journeymen, helpers, and laborers. Requires extensive travel, physical work at heights and in varied weather, technical blueprint interpretation, OSHA training, and 5–7 years of mechanical installation experience.
Top Skills:
BearingsBlueprintsCompressorsConveyor SystemsCranesGearsHigh-Speed SortersHoistsHydraulic SystemsIndustrial Hand ToolsIndustrial MachineryMS OfficePower ToolsPumpsRigging EquipmentSchematic DrawingsTechnical Manuals
Productivity • Design
Performs mechanical design for power system products, converting prototypes into commercially viable systems. Responsibilities include cooling calculations, design compliance, customer consultation, installation inspections, engineering reports, technical manuals, and use of computer-assisted design software. Provides guidance to Level 1 engineers and designers. The position is onsite in Monroe, Louisiana, includes 5–10% travel, and requires three months of onsite training at an out-of-state facility.
Top Skills:
Microsoft Office SuiteSolidworks
What you need to know about the Seattle Tech Scene
Home to tech titans like Microsoft and Amazon, Seattle punches far above its weight in innovation. But its surrounding mountains, sprinkled with world-famous hiking trails and climbing routes, make the city a destination for outdoorsy types as well. Established as a logging town before shifting to shipbuilding and logistics, the Emerald City is now known for its contributions to aerospace, software, biotech and cloud computing. And its status as a thriving tech ecosystem is attracting out-of-town companies looking to establish new tech and engineering hubs.
Key Facts About Seattle Tech
- Number of Tech Workers: 287,000; 13% of overall workforce (2024 CompTIA survey)
- Major Tech Employers: Amazon, Microsoft, Meta, Google
- Key Industries: Artificial intelligence, cloud computing, software, biotechnology, game development
- Funding Landscape: $3.1 billion in venture capital funding in 2024 (Pitchbook)
- Notable Investors: Madrona, Fuse, Tola, Maveron
- Research Centers and Universities: University of Washington, Seattle University, Seattle Pacific University, Allen Institute for Brain Science, Bill & Melinda Gates Foundation, Seattle Children’s Research Institute
